Audi A1 Controls Driving Ignition lock (electronic)
Stop the Audi A1.
Automatic gearbox: Move the selector lever to position P or N.
Press the START ENGINE STOP button Fig. 1.
If you can't switch off the engine in the usual way, please refer to Link.
- Never switch off the engine until the Audi A1 is stationary.
- The brake servo and the power steering system work only when the engine is running. You need more strength to steer and brake the Audi A1 when the engine is switched off. This would mean a greater risk of accidents and serious injury, because you cannot steer and brake in the normal manner.
If the engine has been working hard for a long time, there is a risk of heat building up in the engine compartment after the engine has been switched off; this could cause engine damage. For this reason, you should leave the engine idling for about 2 minutes before switching it off.
After the engine is stopped the radiator fan may run on for up to 10 minutes, even if the ignition is switched off. The fan may also start running again after some time if the coolant temperature rises due to a build-up of heat, or if the engine is hot and the engine compartment is heated up further by direct sunlight.