- Fig. 1 Luggage compartment: Cover hooked into place
- Fig. 2 Luggage compartment (front right): Removing the cover
Hooking into place
Pull out the cover (front) and hook it into the securing rings on the backrest Fig. 1 -1-.
Pull out the cover (rear) and hook it into the securing rings on the side trim -2-.
Removing
Pull the lever in the direction of the arrow Fig. 2 and lift out the cover.
Installing
Place the left end of the cover in the left mounting in the side trim.
Place the right end of the cover in the right mounting and press it down until you hear it engage.
WARNING!
The luggage compartment cover should not be used as a storage shelf. Items placed on this cover could cause injury in an accident or if the brakes are applied suddenly.
Caution!
- The two inner securing rings on the left and right side of the backrest Fig. 1 -1- are not suitable for securing loads (risk of damage). These securing rings are only intended for securing the luggage compartment cover.
- To prevent any damage, let the luggage compartment cover retract slowly.