|
►Audi A3 ►Controls and displays ►Driver information system ◀Controls on multi-function steering wheel
Applies to Audi A3s: with lap timer (S models) and multi-function steering wheel
You can use the lap timer to evaluate the fastest, slowest and average lap times.
After you have evaluated the lap times, you can resume the existing session or start a new session (i.e. start again with lap 1).
To evaluate the lap times, scroll the thumbwheel -A- Fig. 2 until Statistics appears in line -4- Fig. 3. Press the thumbwheel -A- to confirm your selection. The fastest lap "+", the slowest lap "
" and the average time "Ø" will appear in the display. To display the individual lap times, scroll the thumbwheel -A- down 
or up 
.
" and the average time "Ø" will appear in the display. To display the individual lap times, scroll the thumbwheel -A- down or up .Press the thumbwheel -A- to resume the existing session.
To reset the lap timer and clear the lap times, first press the thumbwheel -A-. Then scroll the thumbwheel -A- Fig. 2 until Reset appears in line -4- Fig. 3. Press the thumbwheel -A- to confirm your selection.
To restart the lap timer and record new laps, press the thumbwheel -A-.
To exit the lap timer, press button -B- on the multi-function steering wheel and scroll the thumbwheel -A- Fig. 2 until a new menu item is selected. Press the thumbwheel -A- to confirm your selection.
Explanation of evaluation in Fig. 1:
| -A- |
Total number of laps |
| -B- |
 : Best lap time |
| -C- |
: Worst lap time |
| -D- |
 : Average lap time |
| -E- |
/ : Page down/up |
| -F- |
Delete entries and return to lap time recording |
Note
- Recorded lap times cannot be deleted individually from the overall results.
- The data recorded in the lap timer remain stored after the ignition is switched off.