|
Applies to: vehicles with ski bag
The ski bag is either secured by belt to the seat belt buckle* or by hooks*.
-
- Fig. 86 Applies to: ski bag secured to seat belt buckleRear seat: Securing the bag
-
- Fig. 87 Applies to: ski bag secured by hooksLuggage compartment: Securing the bag
Open the load-through hatch link►
.
Push the bag (with the zip pointing towards the rear of the vehicle) from the luggage compartment through the load-through hatch into the passenger compartment ►.
Applies to: ski bag secured to seat belt buckle
Insert the fastening belt -A- of the bag into the centre seat belt buckle -B- Fig. 86►
.
To prevent the luggage from sliding around in the bag, pull the fastening belt -C- on the bag to tighten.
Applies to: ski bag secured by hooks
Attach the hook on each of the two fastening belts -A- and -B- into the corresponding rear fastening ring Fig. 87►
.
To prevent the luggage from sliding around in the bag, pull the fastening belt on the bag to tighten.
- The bag must be strapped in place with the fastening belt after it has been loaded.
- Make sure that all objects transported in the vehicle with the backrest folded down are secured. They can be catapulted through the passenger compartment in case of a sudden braking manoeuvre - risk of injury!
- If you are transporting skis or snowboards, pull the fastening belt tight between the bindings.
- Place skis in the bag with their tips facing forwards and ski poles with their tips facing backwards.
Note
Fold up the bag only when it is dry.