|
- Fig. 1 Engine compartment: Engine oil filler cap
- Fig. 2 Typical locations of fluid containers, engine oil dipstick and engine oil filler cap
Switch off the engine.
Carefully add 0.5 litres of suitable oil ►Link.
After two minutes check the oil level once again ►Link.
Top up with oil if necessary.
Replace the oil filler cap carefully and push the dipstick all the way in.
WARNING!
- Ensure that no oil comes into contact with hot engine components when topping up: this could cause a fire.
- Wash your skin thoroughly if it comes into contact with engine oil.
Caution!
- The oil level must never be above area -a-, as this may result in damage to the catalytic converter or to the engine. Contact a qualified workshop to extract the engine oil if necessary.
- No additives should be used with engine oil. Any damage caused by the use of such additives would not be covered by the factory warranty.
For the sake of the environment
- Never pour oil down drains or into the ground.
- Always observe statutory requirements when disposing of empty oil canisters.