| 
	
					Applies to vehicles: with multi-function steering wheel
			
					You can use the multi-function steering wheel to operate a number of MMI functions and the driver information system, adjust the volume and switch the speech dialogue system* on/off.
			
					Important: The ignition and the MMI system must be switched on 
				►Link.
			
						-3- How to use the driver information system
							
								The driver information system shows information -2- in several display tabs -1-.
					- To switch between tabs: Press the left/right side of the 
					
					
  
					
					
  button. - To select a function: Scroll the left thumbwheel to the desired function.
 - To confirm your selection: Press the left thumbwheel.
 - To scroll through lists rapidly: Scroll the left thumbwheel quickly.
 - To open/leave a submenu: Press the 
					
					
  button. 
					The equipment installed on your vehicle determines which of the following tabs are available:
					
				
						-4- Steering wheel button
					- To call up the assigned function: Press the 
					
					
  button on the multi-function steering wheel. - To change the assigned function: On the MMI, select MENU button > Car > control button Car systems* > Vehicle settings > Steering wheel button.
 
						-5- Adjusting the volume
							
								You can adjust the volume of an audio source or system message (e.g. during a speech dialogue) directly while it is being played.
					- Volume up/down: Scroll the right thumbwheel up/down.
 - Mute/pause: Scroll the right thumbwheel down. Or: Press the right thumbwheel.
 - Unmute/resume: Scroll the right thumbwheel upwards. Or: Press the right thumbwheel.
 
						-6- Switching the speech dialogue system on/off
					- To switch on: Briefly press the 
					
					
  button on the multi-function steering wheel. Give a spoken command after the beep signal. - To switch off: Press and hold the 
					
					
  button for several seconds. Or: Say the command Cancel. 
					For more information about the speech dialogue system, refer to 
				►Link.
				
						-7- Navigation cue during active route guidance*
					- To have the last navigation cue repeated: Press the 
					
					
  button. - To adjust the volume of the navigation cues: Scroll the right thumbwheel up/down while a navigation cue is being played.
 
				1) 
						 The second tab is only visible if one or more warning/indicator lamps or driver messages are displayed or if the relevant system is switched on.
			

