Applies to: vehicles with Audi tablet
(A) Subject
(B) Advice
(B) Advice
| (A) |
(B) |
|---|---|
| Audi tablet: Audi tablet does not switch on. |
The battery is insufficiently charged. Attach the Audi tablet to the holder in your vehicle
►Link and switch on the ignition. The battery will be charged. It may be necessary to wait until a suitable operating temperature has been reached before the Audi tablet can be switched on again. |
| Audi tablet: Touch control of the Audi tablet is not possible. |
Make sure that the
Lock Audi tablet function
►Link is deactivated. |
| Headphone connection*: No sound on headphones. |
Make sure that the headphone battery is charged and check that the headphones are connected correctly. If necessary, re-connect the headphones to the Audi tablet. |
| Audi tablet: No connection to Wi-Fi hotspot. |
Make sure that the ignition and the Audi tablet are switched on. Check the Wi-Fi settings on the Audi tablet. The Wi-Fi hotspot data for the vehicle must be stored on the Audi tablet
►Link. |
| Audi tablet: Touch control of the Audi tablet is not possible. |
Make sure that the option
►Link is deactivated. |
| Wireless headphones*: No connection possible. |
Make sure that NFC and Bluetooth are activated on the Audi tablet
►Link. |
| Wireless headphones*: Not functioning. |
Make sure that the headphone batteries are charged and not defective. |
| Audi tablet: The functionality of the Audi tablet is restricted. |
Perform a
Device test
►Link on the Audi tablet. Follow the instructions on the Audi tablet. |
| Audi tablet: The battery in the Audi tablet cannot be charged to its full capacity. |
Attach the Audi tablet to the holder in your vehicle. The battery will be charged automatically. Refer to
►Link. |
| Audi tablet: An app is not functioning properly or can no longer be used. |
Close the app using the task manager and then start the app again
►Link. |
| Audi tablet: When the Audi tablet is connected to the MMI system simultaneously via Wi-Fi and Bluetooth, and Bluetooth devices and Wi-Fi hotspots are within range of the vehicle, there may be interference with the audio playback. |
To ensure interference-free playback, you should only ever use one interface (Wi-Fi or Bluetooth) when connecting to the MMI system. |