|
-
- Fig. 1 Headliner: Operating unit
Applies to: vehicles with garage door opener (HomeLink)
The procedure described above is suitable for programming both fixed code and rolling code systems.
Programming/reprogramming a button
Switch on the ignition.
Press and hold the button you would like to program in the headliner for at least 10 seconds. Or:
Select: Function selector button CAR > control button
(Car)*
Systems >
Vehicle settings >
Garage door opener >
Program garage door opener.
Follow the directions on the infotainment system.
Erasing the button programming
Programmed buttons can only be erased all at once; it is not possible to erase them individually. Reprogram the buttons if necessary.
Select: Function selector button CAR > control button
(Car)*
Systems >
Vehicle settings >
Garage door opener >
Clear program settings >
Yes.
Displaying the version/status/regional code
Select: Function selector button CAR > control button
(Car)*
Systems >
Vehicle settings >
Garage door opener >
Version information.
Note
After the buttons have been programmed, the garage door opener may have to be synchronised with the drive unit of the device you wish to operate. Note the instructions provided by the manufacturer of the device.