|
►Audi A6 -2015►Driver assistance ►Driver assist systems
◀Audi active lane assist (lane departure warning feature)
-

- Fig. 1 Turn signal lever: Button for active lane assist
-

- Fig. 2 Windscreen: Camera window for active lane assist
Applies to: vehicles with Audi active lane assist
Press the button to switch the system on/off
Fig. 1. The indicator lamp
or
in the instrument cluster will light up or go out.
or
in the instrument cluster will light up or go out.
Indicator lamps
Ready: The indicator lamp lights up when the system is fully functional. The system is ready to intervene.
Not ready: The indicator lamp lights up when the system is switched on but not ready to intervene. The causes for this can include the following:- There are no lane markings.
- The system cannot detect the relevant lane markings (e.g. temporary markings for road works or markings obscured by snow, dirt, rain or adverse light).
- The vehicle's speed is below 65 km/h, the speed at which the lane assist system is activated (the threshold may vary in different export markets).
- The lane is narrower than 2.5 m or wider than 4.5 m.
- The bend is too tight.
- You have taken your hands off the steering wheel.
