Select: Control button Menu > Settings > Telephone settings.
Call information
With this option you can anonymise the display of the telephone numbers or names for incoming/outbound calls on the driver information system and the MMI display. In addition, the call lists will no longer be displayed if this option is selected.
The telephone numbers or names for incoming/outbound calls and the call lists are still shown in the display of the handset.
Mailbox number
The mailbox number can be entered via the keypad or loaded from the phone book and stored by selecting Ok.
Once the mailbox number has been stored, you can call the mailbox by pressing and holding key 1.
This service must be set up and activated on your mobile network before you can use it. For more information, contact your service provider.
PIN settings
- PIN query - if you activate this setting, the PIN code is always checked when you switch on the phone. Some SIM cards do not allow you to Deactivate the PIN query.
- Change PIN - first enter the existing PIN code for your SIM card. The PIN code can only consist of numbers from 0 to 9. The new PIN code has to be entered twice, as a precautionary measure, and is stored on the SIM card. If you change the PIN code when the SIM card is in a connected mobile phone with SIM Access Profile, you will have to enter the PIN code again on the mobile phone after the Bluetooth connection between the car telephone kit and the mobile phone is terminated. Otherwise you will not be reachable.
Network selection
The following network selection options are available:
- Automatic - to log into your mobile service provider network automatically.
- Manual - a list of all available networks will appear on the display.
- Select network - the networks for your present location are listed. You can choose any of the available networks. This function can be used when the Manual setting is activated for network selection.
Default settings
The handset is returned to the factory defaults.
Autom. keylock
The keypad is locked automatically about a minute after the handset is removed from the carrier. This will happen only if the main screen is displayed and none of the handset functions is being used.