- Fig. 1 Inside of boot lid: Access to manual release
- Fig. 2 Rear seat bench: Bowden cable for manual release
The boot lid can be released manually from the inside.
The boot lid can be released manually from the luggage compartment or from the rear seat bench.
On vehicles with folding backrest
Use a screwdriver to prise out the cover Fig. 1.
To unlock the boot lid press the release lever in the direction of the arrow using the screwdriver.
On vehicles with fixed backrest
Carefully pull the left side of the rear seat bench so far out of its mounting that you can grasp hold of the Bowden cable Fig. 2.
Remove the adhesive tape -B-.
Pull the loop -A- until the boot lid is released.
Stick the Bowden cable back on and press the seat bench back into its mounting.
WARNING!
After the boot lid has been released manually on vehicles with fixed backrest, ensure that the bowed wire retainer under the rear seat bench Fig. 2 engages securely in the mounting when reattaching the rear seat.