The screw connection for the towline anchorage is located behind a trim panel on the right side of the front bumper.
Take the towline anchorage out of the vehicle's tool kit Link.
Carefully detach the trim panel by pulling in the direction indicated (arrows) Fig. 1.
Screw the towline anchorage firmly all the way into the screw connection Fig. 2.
Put the towline anchorage back in the tool kit after use.
When refitting the trim panel, first insert the lugs on the panel into their mountings in the area of the radiator grille. Then insert the opposite side of the panel and press it firmly into the mountings Fig. 1.
The trim panel on some models may differ in appearance from the panel in the illustration.
WARNING!
If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing - risk of accident!
Caution!
The trim cover is secured to the bumper by several retaining hooks. Do not use force when removing the trim cover to avoid damaging it.